Відео

@@EvanEdrok it was beautiful!! Thank you!

Haha thanks Jon!!! I was wondering if anyone would pick up on George's word for "truck" 😂 So glad you liked it!!

@@prislander55 thanks so much :)

Gracias!!

@@Altcine thanks man!!! Really appreciate it!

@@TenAfterTen thank you!!!

@@socksandbuttons4421 thank you so much! I love shooting HD raw and upscaling to 4K, I think it can upscale really well. And definitely HAD to include the camera store, haha

@@VietinghoffAlex Ohh you can upscale it I should try that. Thanks for the info. FinalCut or Premire to upscale?

@@socksandbuttons4421 I use DaVinci Resolve, but it should work in the others as well!

​@@VietinghoffAlex Editing RAW and upscaling at the same time on Davinci, that makes sense! thank you for the tip!🙏

@@PANDRIUX big time, that's why I recorded 18fps instead of 24fps. Just to stretch it out a bit more

Thank you!! Just watched your GoPro Cinema Rig video, love that!

@@VietinghoffAlex🤪 much appreciated!

@@andrewnoden9117 thank you, appreciate that! I saw his video too, really good!

@@aaronw8525 awesome, thank you! I have the Raf step up ring, which I used for my variable ND. Does the wide angle adapter give you a closer minimum focusing distance? That would be amazing for this lens since the default close focus is brutal. Where on the East Coast are you?

@@bassbeats92 any recommendations for a cheap, but good one? Any particular brands that stand out?

@@VietinghoffAlex bambu labs a1 is really good for the price

@@VietinghoffAlex Flashforge Adventure 2 and 3 are pretty forgiving newbie friendly 3D printers, not sure you have them where you live but enclosed temperature control is very handy when you start out since this is where most people fail at first.

@@maxwelldavenport2589 there's a way to roll back the firmware, look up on UA-cam how to downgrade EOS M firmware 2.0.3

@@VietinghoffAlex i did try to look on here already maybe you could find a video since i had no luck with the eos m in particular

@@maxwelldavenport2589 www.reddit.com/r/MagicLantern/comments/zxnmiw/need_help_downgrading_eos_m_from_203_202/

Wow, that's an amazing compliment to receive, thank you!!

Thank you, Cat! Appreciate it :)

Thank you!!! For this one I just had a simple workflow in DaVinci Resolve - I decoded the CDNGs to P3 D60 Linear, then did a Color Space Transform to Arri Log C, then graded using Dehancer, as a Kodak 50D Film Emulation, with Kodak 2383 Print Film, and tweaked the colour heads to bring out the greens more, and added grain.

@@VietinghoffAlex Lovely...using P3 D60 doesn't lose any color fidelity, does it?

@@suyogmarlecha4466 Nope, from what I've read it's the truest colour space for raw data, so I almost always decode CDNGs that way and then Color Space Transform into whichever camera colour space the sensor is closest to.

@@VietinghoffAlex great

@@Altcine thanks!! Definitely really liking it! Just wish so badly that it had gyrologging for stabilization

@@VietinghoffAlex that would actually work well seeing as it's fullframe.

@@VietinghoffAlex Yess..Sigma should give us just one update...gyrologging and its ok then of they are done with the fp!

Awesome!! Thanks!

@@GregAsdourian yes, I think this was the tutorial I followed! ua-cam.com/video/fHTyQ90nHmw/v-deo.htmlsi=OyaiyU0yGNWdDz9m

@@VietinghoffAlex still having issues getting the Q Set button to stay. Any tips?

@@GregAsdourian A friend and I replaced his button ribbon cable recently, just takes a few tries to make sure you really line up the little black knobs in the tiny holes.

@@snappy8k I know, and the Mir 20mm is ever pricier!!

@@VietinghoffAlex Oh, we have more of these lenses, so they cost a bit less ($200)

@@snappy8k oh wow, nice! I see them going for almost $600

Yup, it is a CCTV lens! One thing I didn't make clear in my video is that with the conversion the GoPro becomes natively CS mount, but comes with a small CS to C mount spacer so it can natively take C mount too.

@@VietinghoffAlex what does IR corrected lens mean? Will it work fine on BMPCC? Sounds like an awesome combination because how small the setup is.

It was pretty easy!

Good question! If I can get my hands on one I'll test it out! I've read that it works on the Lumix 12-42!

Yup, in this Short here: ua-cam.com/users/shortsMfwuaHoa9ec?si=1LssYR7V-J0neo57

Thank you! Amazing, I'm working on building out a Canon FD set right now, just need an 85mm to round mine out! And when you buy Dehancer please consider using my code HOFF10 ;)

Glad to hear it, mine too!!

Glad to hear it!!

Which GoPro? And is it a Back-Bone modified one?

@VietinghoffAlex Yep, grabbed a backbone hero 11 based on your video.

@@officially.nguyening awesome, so glad to hear it!! I'd install GoPro Labs for the 11 (you can look up on the GoPro site how to do that), then using GoPro Labs turn down sharpening, noise reduction, and make it a flat colour profile. Then shoot in 4:3 mode if desired, as well as try to attach an ND to the lens so you can keep the shutter at 180° from the frame rate!!

Haven't tested it yet, I have two Metabones EF-MFT 0.58x speedboosters though, I'll try them out.

@@VietinghoffAlex Thank you for the test shot. I would be also courious about x0,58 compatibility! Important question. Dont you felt the image get too soft? Looks promising however and colors are much much nicer!

Personally I didn't find it too soft, I actually normally use mainly vintage lenses so I like the look!

@@VietinghoffAlex Thx for the answer. If you have time please try out and let us know if the Speedbooster x0.58 is okay with the filter. That is an important question however measurements tell it should work nicely without touching each others surface. With a short test footage about softness, that would be super helpful for many of us.

I couldn't get it to work with my 0.58x Metabones EF-MFT speedbooster, but apparently it works with the 0.64x. I'll try to test that one out soon!

I think the next batch comes out in a couple weeks!

My pleasure!! I'll definitely be talking about the OLPF in my in-depth BMMCC video soon!

Awesome, happy to help!!!

Thanks, man!!!

I made them myself by uploading a PNG from the internet to StickerMule!

Definitely!!

The grip is actually a Digital Bolex grip, the loupe is this one: www.amazon.ca/gp/aw/d/B09FNVGH6M?psc=1&ref=ppx_pop_mob_b_asin_image

The purpose was to specifically see how they compare as a Super 8-type camera. I also have a bunch of footage in there from the GoPro without the emulation. And you can find any GoPro footage online that will give you a sense of the GoPro sensor colours and motion cadence. The only difference with mine is that it has an interchangeable lens :)

I really want to make or test a CinePi! That's high up on my list of camera projects this year. Also been watching some videos of people installing Rpi cameras and similar inside old Super 8 cameras. I think I'll try CinePi first, then that! Thanks :)

@@VietinghoffAlex probably best to start with cinepi, because it’s about the same price as the rest really and you get raw. Plus you can do custom hardware controls with cinemate .

@@mirelchirila Awesome. Has there been any development using it with RPI5 yet?

@@VietinghoffAlex I don’t know, I got a pi4 off eBay for my stuff . And to be fair why spend the money on anything else , especially since it’s cheaper. What would be cool would be some new sensors, maybe something bigger. Like the arducam global shutter one. There’s another cool pi camera project for webcams , another UA-cam channel forgot the name Jeff something has a good script on that one. And looking through the readme files on their git they might have bigger sensor support. They use a pi zero , that’s way smaller. Another thing I’d love to have would be log gamma , and I’ll have to read the manual on that one , because there’s got to be a way to modify picture profiles. Although I’m not sure now but the pi5 might have more data lanes to the sensor so maybe we can get better resolution when it gets up and running on that platform. Honestly the sensor to cpu part of it is new electronics to me . They have their own protocols and configurations that require a lot of research. I got a bit into that with ccd but nothing bar a few Wikipedia entries with modern sensors. Spoiler alert there are good reasons video took off on cameras only after cmos sensors 😂😂😂😂, and the ones that did it on ccds, were rarely pure ccds.

It is uncompressed CDNG 12-bit raw. But you can losslessly compress it by using Slimraw

@@VietinghoffAlex It takes a lot of space. On a 2TB card less than 300h in 640x480/24 frames/1bit of color per pixel. Let's say 1920x1080/30/12 bits 88MB/s Seven hours on a 2TB card.

Thanks you!!

It's way more than that. Did you watch the video?

Thanks! I actually went with 12-bit Lossy 4:1; I followed this tutorial: ua-cam.com/video/TW4IVjbgVck/v-deo.html

Thanks so much! I have more on the way!

You need to make sure you're using a fast enough SD card and enable SD overclocking. I recommend using the latest Danne branch of Crop Mood.

As the prophecy states, there shall be more videos!!

Hahaha, glad you liked it 😂